日本PMT切割控制仪PCS-100 PCS-250

日本pmt切割控制仪pcs-100 pcs-250日本pmt切割控制仪pcs-100 pcs-250日本pmt切割控制仪pcs-100pcs-250
broken tool sensor
on the basis of years of experienceand sales volume, the quality and performance of pcs-100 and 250have been improved to meet various demand from the customers.resistibility against chemicals, coolant invasion, andelectro-magnetic wave have been greatly improved. newly added lo-losetting makes the sensor available for small dia. of tools.
●outline
in automatic orunattended machining, it is imperative to detect the broken toolwhen it took place. if it's left undetected, a huge loss of costwill be caused from such as scrap parts, machine damage andmachine's downtime. it can be easily installed in the machine at anaffordable cost, and detect the breakage of drill, tap andreamer.the sensor isbracket-mounted close to the tool easily and conveniently. a needleis arranged in different length and, and can be bent so that thesensor would be installed near by the tool flexibly even though thespace around the tool is tight and limited. scu control unit isinstalled in the machine control cabinet.pcs-100: if thetool is present, a needle will contact the tip and return to thestarting position, and the machining goes on. if the tool isbroken, a needle will swing past the tool and interpret thecondition as a broken tool. in this case, the fault signal istransmitted to the machine, and the machining is stopped.
pcs-250: it monitors the angle input by teaching operation, andoutput ok or fault signal.high durabilityunder the use of coolant and severe condition.(ip67)due to thegear-less design, pcs is very strong against the shock andvibration. strong enough against 3 shift operation for its highdurability and rigidity.
●pcs-100 sysｔｅm　componentparts
contact sensorpcs-100 with needle ass'y
control unit scu-100
connecting cable std. 5m w/l90 connector
●pcs-250 sysｔｅm　componentparts
contact sensorpcs-250 with needle ass'y
control unit tcu-250
connecting cable std. 5m w/l90 connector
contact sensorpcs-100 contact sensorpcs-250
housing anodizedaluminum →
needle swing swing range5-175°
mechanically adjustable electronicallylearned swing range up to 300°
completely diagnostic system.
needle max life needle instandard
length 140mm long needle 200mm →
motor drive direct drive (nogear box) dc motor →
sealing sealed againstliquid and solid contaminants. rating ip-67 →
cable 90° or straight,moulded 4 pin connector.
standard length 5m, maximum 50m →
exception (5 pin connector)
  control unitscu-100 control unittcu-250
operatingvoltage 24vdc →
max. current 250ma →
operating temp 0-55℃ →
housingmaterial polycarbｕｌ94ｖ1 →
max. wire size 12awg →
mounting 35mm din rail →
ok fault relay dry contct contctrating 
2a＠250vac →
additionalfunctions changeable toreverse logic for space monitoring ･remote teachingtermiral as well as teach button equipped.
･normal tolerance-nt extended tolerance-et select swich.

---

意赛德科技发展有限公司
严涛
13709240965
北京市大兴工业区金融大厦四层D29 QQ:2586866473

---

中科核安 HA3803 便携式辐射巡检仪 高精度辐射剂量监测
武汉景观灯,昱川照明,led园林景观灯
北京有卖宁夏盐池滩羊礼盒装
?供应天泰TR-507耐热钢焊条 堆焊焊条价格
上海批发5毫米铝板6061
日本PMT切割控制仪PCS-100 PCS-250
杭州注册建筑公司流程 全方位服务
夏季小吊带小背心批发展男女士便宜工字背心批发便宜纯色背心批发
河南商丘韩版时尚带帽拉链中长款卫衣批发
拜尔石笼网/格宾网/雷诺护垫/防护网堤坡
供应公路护栏网，框架护栏网，双边护栏网
南山科技园知名度高的复印机租赁公司，品质铸就你的办公生活
转让二手陕西北人9色凹版印刷机二台，价格美丽！
C型钢|直缝焊管|方矩管
台湾银泰PMI线性滑轨
万用旅行电源转换插头,多功能转换插座,,旅游转换头
商丘焊锡条|焊锡条多少钱|富杰焊锡(优质商家)
贵阳云岩区幼儿武术培训多少钱？志勋功夫馆：高级私教
天津河西怎样学英语最快记单词，誉德文苑助力少儿成长
皮线光缆保护盒、皮线光纤对接盒